CP 503/A, CP 505/A,D,K, CP 507/
A,C
Connections and wiring
Project engineering manual V1.06
52
© KEBA 2021
6.9
Graphic interface (DVI)
The DVI graphic interface (X60A DVI) is used to connect an operating panel.
The CP 50x/x has a standard DVI-D interface (digital signals only). A VGA
operation with adapter is not possible. The free pins are used for an RS485
retransfer (RFB interface).
Use the KEBA-supplied cable when connecting a KEBA operating device. A
standard operating device can be connected using a standard DVI cable. In
both cases, no damage to the device occurs despite the deviating pin as-
signment.
KEBA does not perform any tests for the correct functionality of operating
devices from third-party manufacturers.
6.9.1
Pin assignment
Fig. 6-41: Pin assignment DVI socket
Pin no.
Designation
Pin no.
Designation
1
TDMS-Data 2-
2
TDMS-Data 2+
3
Shielding TDMS-Data 2,4
4
TDMS-Data 4-
5
TDMS-Data 4+
6
DDC clock (SDC)
7
DDC data (SDA)
8
RS485 TX/RX+ *)
9
TDMS-Data 1-
10
TDMS-Data 1+
11
Shielding TDMS-Data 1,3
12
TDMS-Data 3-
13
TDMS-Data 3+
14
+5 V
15
Ground for +5 V
16
Hotplug-Detect, enable RS485
17
TDMS-Data 0-
18
TDMS-Data 0+
19
Shielding TDMS 0,5
20
TDMS-Data 5-
21
TDMS-Data 5+
22
Shielding TDMS-clock
23
TDMS-clock+
24
TDMS-CLK-
C1
n.c.
C2
n.c.
C3
n.c.
C4
RS485 TX/RX- *)
C5
Analog: Ground → GND
*) Deviation to standard
6.9.2
Cable and plug specification
For details, refer to the system manual.
