11
GENERAL STANDARDS
General standards
DGUV regulation 3 Electrical installations and equipment
DIN 46228-1
Tubular end-sleeves without plastic sleeve
DIN 46228-4
Tubular end-sleeves with plastic sleeve
DIN IEC 60364-5-54 Low-voltage electrical installations - Part 5-54: Selection and erection of
electrical equipment - Earthing arrangements, protective conductors and protec-
tive bonding conductors
EN 60204-1
Safety of machinery - Electrical equipment of machines - Part 1: General requi-
rements (IEC 44/709/CDV)
EN 60439-1
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and
partially type-tested assemblies (IEC 60439-1)
EN 60529
Degrees of protection provided by enclosures (IP Code) (IEC 60529)
EN 60664-1
Insulation coordination for equipment within low-voltage systems - Part 1:
Principles, requirements and tests (IEC 60664-1)
EN 60721-3-1
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 1: Storage (IEC 104/648/CD)
EN 60721-3-2
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities - Section 2: Transportation and
handling (IEC 104/670/CD)
EN 60721-3-3
Classification of environmental conditions - Part 3: Classification of groups of
environmental parameters and their severities; section 3: Stationary use at
weatherprotected locations (IEC 60721-3-3)
EN 61800-2
Adjustable speed electrical power drive systems - Part 2: General requirements
- Rating specifications for low voltage adjustable speed a.c. power drive systems
(IEC 61800-2)
EN 61800-3
Adjustable speed electrical power drive systems - Part 3: EMC requirements
and specific test methods (IEC 22G/297A/CD)
EN 61800-5-1
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements
- Electrical, thermal and energy (IEC 61800-5-1)
UL 61800-5-1
American version of the EN 61800-5-1 with „National Deviations“
EN 61800-5-2
Adjustable speed electrical power drive systems - Part 5-2: Safety requirements
- Functional (IEC 61800-5-2:2016); German version EN 61800-5-2:2017
Summary of Contents for DYNAMIC LINE 4 SE-CF-SP15
Page 2: ......
Page 71: ...71 Certification 6 2 UL Marking UL cUL certification in preparation ...
Page 74: ...74 NOTES ...
