KEB DYNAMIC LINE 4 SE-CF-SP15, Manual

Page: 13 / 76

13
bASIc SAfETy INSTRUcTIONS
1.2 Transport, storage and proper use
The transport is carried out by qualified persons in accordance with the environmental
conditions specified in this manual. Motors shall be protected against excessive strains.
ESD
Damage due to improper transport
► Transport only on suitable devices (folding boxes, transport frames, flat
pallets, usw) !
► Avoid any impacts, sharp sudden movements and strong vibrations!
► Motors must only be lifted and placed at creeping speed to prevent dam-
age to the bearings !
Do not store Motors
• in the environment of aggressive and/or conductive liquids or gases.
• with direct sunlight.
•
outside the specified environmental conditions.
1 basic Safety Instructions
The COMBIVERT is designed and constructed in accordance with state-of-the-art tech-
nology and the recognized safety rules and regulations However, the use of such de-
vices may cause functional hazards for life and limb of the user or third parties, or dama-
ges to the system and other material property.
The following safety instructions have been created by the manufacturer for the area of
electric drive technology. They can be supplemented by local, country- or application-
specific safety instructions. This list is not exhaustive. Violation of the safety instructions
by the customer, user or other third party leads to the loss of all resulting claims against
the manufacturer.
NOTICE
Hazards and risks through ignorance.
► Read the instructions for use !
► Observe the safety and warning instructions !
► If anything is unclear, please contact KEB Automation KG !
1.1 Target group
This instruction manual is determined exclusively for electrical personnel. Electrical per-
sonnel for the purpose of this instruction manual must have the following qualifications:
• Knowledge and understanding of the safety instructions.
• Skills for installation and assembly.
• Start-up and operation of the product.
• Understanding of the function in the used machine.
• Detection of hazards and risks of the electrical drive technology.
• Knowledge of
DIN IEC 60364-5-54.
• Knowledge of national safety regulations.