KBL megaSun 5600, Manual

Page: 15 / 63

16
Step Procedure Reference
1 Fix the canopy. 10
2 Remove the screws and tilt down the canopy and/or
lateral pane(s). Illustr. 5-2
Illustr. 5-3
3 When the pane is in the lower position, you can lift it out of
the swivel hinge support, if necessary.
4 Mount the pane in reverse order. Make sure that the frame
is correctly positioned in the hinge.
5 When closing the pane, all air nozzles must be matching
their counterparts. If not, carefully push the nozzles
concerned into their proper position.
6 Release the canopy.
Operation and Service megaSun 5600
5.2 Dismantling the acrylic panes
Dismantling the
pane in canopy
and lateral part
The following tables explain how to dismantle the acrylic panes.
Illustr. 5-2 Release the four screws
of the canopy pane Illustr. 5-3 Release the four screws
of the lateral pane
Base and duct
pane
The following table shows how to clean the base and duct pane.
The electronic parts installed underneath the bed must not get in
contact with any moisture.
Therefore, in order to clean the underside of the base pane and
the inner base section, use a slightly damp micro
fi bre cloth
only. You can also use it to clean the shoulder tanner. You can
use megaClean as a detergent (spray the cloth with it).