KBL megaSun 5600 Manual Download Page 7

Page: 7 / 63

A function is switched on by pressing the plus sensor, which is
also used to increase the output stepwise. To set the maximum
value (e.g. fan speed) the sensor

eld has to be pressed again

and again until the maximum value has been reached.

A function is switched off by pressing the minus sensor, which
is also used to decrease the output step by step. To set the
minimum value (e.g. volume) the sensor

eld has to be pressed

again and again until the desired value has been reached.

4.2 Functions

Start

You can use this touch key to switch on the apparatus during
the warm-up time.
If the tanning session has been interrupted by means of the
„Stop“ key, it can be continued after touching the „Start“ key
once again, provided the coin-operated counter has not run
down yet.
The numerical display shows the tanning time.
When the tanning time is over, the running text will appear
again.

Stop

By pressing this touch

eld for at least 2 seconds you can

terminate the tanning session prematurely.

Running time

During the tanning program the running time is displayed in this

eld.

When adjusting the volume, the value set between 0 ... 99 % will
be displayed in this

eld for a short time.

When adjusting the fan speed, the value set between 20 ... 99
% will be displayed in this

eld for a short time.

Summary of Contents for megaSun 5600
































































Search results

Summary of Contents for megaSun 5600

Reviews:

Related manuals for megaSun 5600

Brands by name

Popular brands

KBL megaSun 5600, Manual

Search results

Summary of Contents for megaSun 5600

Reviews:

Related manuals for megaSun 5600

Brands by name

Popular brands