KBL megaSun 5600, Manual

Page: 10 / 63

11
Operation and Service megaSun 5600
Body fan
The power of the body fan can be increased or reduced by
steps of 10 % by touching the
fi elds „+“ or „–”.
After being switched on, the fan starts running at the power-level
value that has been entered for ACS/A.START on level II of the
service menu.
When changing the value, the current setting is displayed as a
two-digit number between “20%” (minimum) and “99%” (maxi-
mum) in the numerical
fi eld for a short time.
In order to switch off the body fan completely, press the “ − " fi eld
several times until the value of 20% appears. Then press the "–”
fi eld once again and keep the key pressed for 0.5 seconds. After
a short time lag the body fan is then switched off.
The body fan can be switched on again at any time simply by
touching the “+”
fi eld.
Channel selection*
With the help of this system you can choose the audio source,
e.g. change the CD or go to the next piece of music (MP3).
The MP3-player is equipped with a 256MB-chip, which can take
the volume of the 3 music CDs.
The studio operator himself can choose the music and with the
computer he can load it to the chip. The MP3-player is designed
in such a way that you only have to change the chip for the mu-
sic. KBL delivers all the apparatuses with MP3-players with the
music of the CD „megaSun & friends“.
As an optional feature, the music of the MP3-player can be
turned on during the tanning breaks.
Tip: The music of the MP3-unit can only be controlled by one
audio source, i.e. either by the chip of the MP3-player or by an
external music source.