KBL megaSun 5600 Manual Download Page 8

Page: 8 / 63

Operation and Service megaSun 5600

As soon as the tanning time is over a program to shut down the
sunbed will be started:

•

a soft voice reminds you of the end of the tanning session
and says good-bye,

•

burners, tubes and the ventilation system will be reduced
step by step,

• the LEDs (in apparatuses with activeColor) will shine in

the colour adjusted for another 20 seconds.

End of the tanning

session

These double arrows point to some more menus which can be
activated by pressing the „+“ or „-„ keys above the double arrow
symbol.
The following menus are available which will be explained in
more detail below:

By calling up these additional menu functions you can see which
functions are activated after switching on the apparatus.
Special customer requests can be pre-selected in the service
menu (see Section 8.2 ff.)

Extended menu

You can adjust the volume of the music by touching the „+“ and
„-„ keys. The volume will be displayed in the numerical

eld as a

value between 0 – 99 %.
Press the corresponding sensor key again and again until you
have reached the desired volume.

Volume*

* this is only preset if the feature is ordered

Summary of Contents for megaSun 5600
































































Search results

Summary of Contents for megaSun 5600

Reviews:

Related manuals for megaSun 5600

Brands by name

Popular brands

KBL megaSun 5600, Manual

Search results

Summary of Contents for megaSun 5600

Reviews:

Related manuals for megaSun 5600

Brands by name

Popular brands