Kaysun KEM-30 DNH3, Technical Manual

Page: 131 / 160

Time Off Turn off time, when Time Off selecting
-- -- , then means do not turn off the unit , display as
Fig 4-38.
Timing Status Drive up the weekly timing function in the current period or not.
Control Mode Automatically drive-up mode
Mode set Operation mode: Cooling, Heating, Water Pump
Setting temp. Setting temp.
Note: The ON/OFF time of the weekly timing can not be at the same time point, the following will be not
allowed for example if the ON time was 8:00 of Period1 and the OFF time was 8:00; and the OFF time of
Period1 was 10:00 and the ON time of Period2 was 10:00. If there is error and then will pops-up prompt
dialog box display as Fig. 4-39:
If no Timing Status has been set, a message box as Fig. 4-40 would pop up
If no Control Mode has been set, a message box as Fig. 4-41 would pop up.
If no Mode set has been set, a message box as Fig. 4-42 would pop up.
If no Setting temp. has been set, a message box as Fig. 4-43 would pop up.
Fig.4-38
Fig.4-39
Fig.4-40
Fig.4-41
Fig.4-42
Fig.4-37