Kaysun KEM-30 DNH3, Technical Manual

Page: 125 / 160

Main interface of this software as Fig.4-7, detail as follows:
1 Menu includes System Equipment management Schedule management Communication
parameter Help
2 System configuration illustration (The as Fig.4-7): Not more than16 wired controllers could be
connected to the computer. This kind of wired controller could be connected to the module group of : 25KW
30KW 60KW 65KW 120KW 180KW etc. Total 16 sub-modules could be jointed to a wired controller. (For
the Maximum sub-module quantity could be jointed to a wired controller, the quantity conversion between
module group and sub-module, please refer to
Software application .
Wired controller
Module group
Sub-module
For the meaning of the different color represent, please see below picture. AC system diagram in Software
Application”
3 ”Lock KJR” (The in Fig.4-7): To lock or unlock the current selected wired controller to limit the wired
controller setting the refrigeration system.
4 ”System operate set” (The in Fig.4-7): To set the operation of the selected refrigeration system.
5 ”Query system parameter” (The in Fig.4-7), Press this key to query the selected refrigeration system,
the current operating parameter will be display.
6 ”Query” (The in Fig.4-7): Press this key to query the selected sub-module, the current operating
parameter will be display.
7 ”More parameters” (The in Fig.4-7): More operating parameter will be display.
If the software has been configured, then will automatic scan the configured system while open the software,
the scan interface display as Fig.4-9.
Provided that malfunction occur, window as Fig.4-10.
No. Color Status Equipment
1
OFF-LINE CONTROLLER SUB-MODULE
2
NORMAL CONTROLLER SUB-MODULE
3
ON-LINEERROR SUB-MODULE
Fig.4-8
Fig.4-9