iMPorTanT insTrucTions For
use
– Creamer chargers are to be handled according
to the safety instructions on the package of the
chargers.
– Empty chargers are to be removed from the
cream whipper head with the charger holder.
– Use KAYSER one-way chargers only!
– Keep the cream whipper out of sun and away from
heat.
– Store the cream whipper only in the refrigerator;
never in the freezer compartment or the deep-
freezer.
– Do not remove the head of the cream whipper as
long as there is pressure inside the bottle. Always
operate the lever and release the pressure first.
– Do not change anything on the cream whipper or
its safety devices.
– Only original KAYSER spare parts have to be used.
When you need some parts, please contact us.
– Clean only by rinsing. Do not use sharp-edged
objects. To take the cream whipper apart, only
remove the parts shown on the drawing. If the
cream whipper has been out of use for a rather
long time, clean with water as above.
saFeTY insTrucTions
Cream whippers work with pressurized gas and
therefore there is a need to take special safety
precautions.
– Never use a damaged cream whipper; if a cream
whipper drops to the floor, it must be checked by
us before using it again.
– Cream whipper and creamer chargers are to be
stored out of reach of children.
– Do not lean above the cream whipper when you
screw in the charger.
– The head of the cream whipper screws easily onto
the bottle’s threading. Never ever use force to
screw the KAYSER
head on. Do not cross-thread.
– Do not remove the valve screw from the cream
whipper as long as there is still pressure inside.
– This cream whipper has a valve which prevents
overpressurization. It is located inside the metal
piercing unit. Do not tamper with this assembly
or attempt any adjustments as this would end the
guarantee and our liability.
– Keep these operating instructions – they help you
to work the cream whipper correctly.
– Use this cream whipper only for the purpose
indicated in these operating instructions.
WarninG
KaYser cream whipper heads must only be
screwed onto KaYser bottles. The KaYser
logo can be found on the whipper head and
the base of the bottle. The use of components
other than original KaYser components can
be dangerous.
