浙江华洋赛车股份有限公司
6- 1
55
2. Excessive carbon deposit in the combustion chamber
3. The fuel used does not meet the specifications.
4, the ignition timing is too much ahead
possible reason
1, CDI failure
2, the magnetic motor failure
3, sensor failure
4, the valve clearance is too small
possible reason
1. Carburetor seal ring deformation
2, the carburetor connection is loose
3, the seal ring rupture
Check spark plug fire condition
→
spark is weak or intermittent
fire jump
→
spark is normal
5.11.4 Poor performance at high engine speed
Check direction
1. Check ignition timing and valve clearance
→
incorrect
→
correct
2. Disassemble the carburetor
fuel pipe
→
the fuel flow is
restricted
→
the fuel can
flow freely
3. Check the carburetor
→
carburetor is blocked
→
carburetor is not blocked
4, check the timing of the
valve
→
not correct
→
correct
possible reason
1, spark plug damage
2, the magnetic motor failure
3, ignition coil failure
4, CDI failure
5, the transmitter failure
6, switch failure
7, spark plug cap failure
8, the power circuit has a
wrong connection or short
circuit
Summary of Contents for AU200
