KAYO MOTOR AU200, Maintenance Manual

Page: 103 / 138

浙江华洋赛车股份有限公司
5- 47
5.10.2Decomposition of the
crankcase
Place the engine on the workbench
Remove the right crankcase box bolt 8
×
M6
Remove the left crankcase box bolt M6
Turn the engine over so that the right
crankcase is above
Remove the right crankcase and separate the
left crankcase from the right crankcase
Remove the gasket and locating pin
Remove the crankshaft and balance shaft
Remove the transmission mechanism
Remove the shifting mechanism
5.10.3 Crankshaft inspection
Place the crankshaft on the V-shaped iron
Measuring the curvature of the crankshaft
with a dial indicator
The actual curvature of the crankshaft is 1/2
of the total reading (TIR)
Maintenance limit
：
0.10mm
Transmission gear
Shift gear
Locatin
g pin
Crank shaft
Blance shaft