KAYO MOTOR AU200, Maintenance Manual

Page: 84 / 138

5
发动机
5- 28
clip into the valve spring seat.
Note: To prevent permanent deformation
of the valve spring, do not over compress
the spring , only need to fit the valve lock
clip
.
Then tap the end of the valve with a plastic
hammer to make the lock clip firmly into the
ring groove.
5.5.16 Cylinder head installation
Install new gasket and locating pin
Note: Do not allow dust and impurities to
enter the cylinder
Install the cylinder head and insert and
support the timing chain to prevent it from
falling into the box.
Install the cylinder block connecting bolt
2
×
M6
Torque value: 8~12N
·
m
Mounting the camshaft on the cylinder
head
Mount the rocker support bracket
Install the Ab bolt fastening nut and
gasket ring
Nut torque
：
28~30
Note: When installing the camshaft, first
Oil shield