KAYO MOTOR AU200, Maintenance Manual

Page: 115 / 138

浙江华洋赛车股份有限公司
6- 3
Maintenance information
Attention
•
When carrying out maintenance work on the front wheel and suspension system,
the frame must be securely supported before it can be used.
•
Inspection, inspection and inspection of lights, instruments and switches are carried
out according to the corresponding chapters.
•
Do not use excessive force on the wheels. Be careful not to damage the wheel
•
When removing tires from the rim, special tire and rim protectors must be used to
avoid damage to the rim
Maintenance standard
item standard Use limit
Rim
Axial runout 0.8mm 2.0mm
Radial runout 0.8mm 2.0mm
wheel
Residual trench
—
3mm
Air pressure 35kPa(0.35kgf/cm
2
)
—
Front brake Brake handle clearance 0mm
—
Tightening torque
tool
item size torque
Steering lock nut GB9457 M10 × 1.25 33~45N·m
Front brake disc bolt M8
×
20
×
1.25 22~30N·m
Front brake caliper body bolt GB5789 M8 × 16
30~36N· m
Rim shaft slotted nut GB9457-1988 M14 × 1.5 × H18 209
～
278N· m
Front shock absorber bolt GB5789 M10 × 1.25 × 45 Half thread
45
～
59N· m
Rim mounting nut GB6187-86 M10 × 1.25 45~59N· m
Lower rocker bolt GB5789 M10 × 1.25 × 80 45~59N· m
inner hexagon m6 Assembly tool shaft
Open ratchet wrench s8 Pneumatic wrench s12
Open ratchet wrench s10-s12 Pneumatic wrench s14
Open ratchet wrench s14 Socket wrench m12
Open ratchet wrench s17-s19 Socket wrench m14
Open ratchet wrench s22 Socket wrench m20