KAYO MOTOR A180, Service Manual

Page: 93 / 213

2.Maintenance information
Transmission gear oil
Check
Check the gearbox for oil leakage.
Erect the locomotive with the main parking frame
on the flat ground.
Turn off the engine and remove the gear oil filler
bolt.
Place a measuring cup under the drain hole.
Remove the bolt of oil leakage hole and drain the
gear oil into the measuring cup.
Check whether there is enough oil.
Replace
Remove the oil injection bolt first, and then remove
the oil drain bolt to drain the oil.
After the gear oil is drained, install the oil drain bolt.
Torque: 0.8~1.2 kgf-m
Add a certain amount of gear oil from the oil
injection hole.
Install the oil filler bolt.
Torque: 1.0~1.4 kgf-m
NOTE
Check whether the sealing gasket is in good
condition. If it is deformed or damaged,
replace it with a new one.
Grease bolt