![KAYO MOTOR A180 Service Manual Download Page 38](http://html1.mh-extra.com/html/kayo-motor/a180/a180_service-manual_3703139038.webp)
ZHEJIANG KAYO MOTOR CO., LTD.
-2
3 Regular inspection and adjustment
Maintenance Information……………………………………………………………3-1
3.1 Determination of maintenance cycle……………...……………………….……3-2
3.2 Inspection and maintenance method……………………...………………….…3-3
3.3 Steering column, brake system……………………………....…………………3-5
3.4 Wheel………………………………………………………………....……...…3-9
3.5 Suspension system…………………………………....…………………...……3-12
3.6 Gear shifting mechanism and fuel device……………………………..…….…3-13
3.7 Throttle check……………………………………………...……………...……3-14
3.8 Gear display meter…………………………......……………………..…...……3-15
3.9 Lighting device………………………………………………………....………3-15
Maintenance Information
Operation notes
Note
Since the exhaust gas contains toxic components such as carbon monoxide (CO), please
do not run the engine for a long time in a closed place or a poorly ventilated place.
When the engine just stopped, the temperature of muffler and engine was still very high,
and if it came into contact with skin, it would cause burns. If the engine must be
overhauled when it has just stopped, it is necessary to wear long-sleeved overalls and
gloves for operation.
Gasoline is very easy to catch fire, so fireworks are strictly prohibited in the workplace.
Pay attention not only to open flames, but also to electrical sparks. In addition, because
the evaporated gasoline is in danger of explosion, the operation should be carried out in a
well-ventilated place.
Summary of Contents for A180
