2
Shop Online
CLASSIC 800 Product Manual
Introduction
CLASSIC
™
800 Electronics
Display Panel & Intelligent User Interface
The Kayden CLASSIC 800 Electronics Module is designed to be easy to install and adjust while displaying
several control functions. All Kayden CLASSIC 800 Electronics Modules feature:
•
Universal Power Input
•
4-20 mA Analog Output
•
Continuous Self-test diagnostics with Fault Indicator
•
Start-up Bypass Timer
•
Easy setup; no jumpers or trim pots
•
True Temperature Compensation
•
Incrementally adjustable heater power, range and
relay set points.
•
All CLASSIC 800 series switches/transmitters use the same Electronics Module making it a universal spare
part. The Electronics Module is easily installed in the field without returning the entire switch/transmitter to
the factory.
Display Panel Indicators:
Relay 1
On steady when Relay 1 is energized
Relay 2
On steady when Relay 2 is energized
Fault
Indicates a self-test error or fault condition
Set Point 1
On steady when viewing Set Point 1
Set Point 2
On steady when viewing Set Point 2
Run Mode
Flashing when switch is operating
Bypass
Flashing when the Start-up Bypass Timer
is active
Thermal Signal
Displays Thermal Signal
The Thermal Signal increases as:
Flow
The flow rate increases
Level
The sensor is submerged
Interface
The sensor is submerged by the second liquid of
greater thermal conductivity
Figure 1 - CLASSIC 800
Display Panel
Typical Applications
•
Pump Protection - Dry Alarm
•
Leak Detection
•
Flow Monitoring &
Verification
•
Tank Overflow Protection
•
Flare Gas Monitoring
•
Monitoring Purge Air Flow
•
Drain Line Flow
•
Interface Control in
Separation Vessels
•
High Pressure Flows
•
Lube Oil Systems
•
Vent Monitoring
•
Natural Gas to Boilers
•
Emergency Eye Wash
Stations
•
Tanker Loading & Unloading
•
Relief Valve & Rupture Disk
Flow Monitoring
•
Remote Indication of Flow
via Analog Output & Digital
Communications
•
Liquids, Air & Gases
•
Slurries
•
Interface Detection
•
Corrosive Liquids
•
Hazardous & General-
Purpose Areas
•
Interface Control & Level
Detection in Settling Vessels
•
Chemical Injection/Additive
Flow Monitoring
