34
6.2.20 Fine Tune
Int: This is a fine tuning function for values smaller than a semi-tone.
Ext: This is used to transmit fine tuning settings to external sound modules.
If the TX CC is “On”, the value is transmitted when a SETUP is recalled.
When the TX CC is “Off”, this page won’t be displayed.
The value changes from -63 to +63.
6.2.21 Damper
This parameter determines if the damper pedal is active (On, with natural
decay), deactivated (Off) or set to HOLD (On, with steady sustain level) for
the selected zone.
Use the HOLD value, if you don’t want a sound to disappear. HOLD is only
available for internal Sounds.
6.2.22 Foot Switch
This parameter determines if a Foot Switch connected to the FSW jack is
active (On) or not (Off) for the selected zone.
The type of controller assigned
to the footswitch is a common Setup parameter and is used for all zones of a
Setup as a global parameter.
6.2.23 Expression Pedal
This parameter determines if an Expression Pedal connected to the EXP
jack is active (On) or not (Off) for the selected zone.
The type of controller
assigned to Expression pedal is a common Setup parameter and is used for
all zones of a Setup as a global parameter.
6.2.24 Modulation
This parameter determines if the Modulation Wheel is active (On) or not
(Off) for the selected zone.
6.2.25 Bender
This parameter determines if the Bender Wheel is active (On) or not (Off)
for the selected zone.
6.2.26 Transmitting Bender Range (Ext only)
This parameter decides if a Bender Range should be transmitted (On) or not
(Off) when a SETUP is recalled.
When the Bender is “Off”, this page won’t
be displayed.
1
Concert Grand
Bender = On
3
External
TX BendrRng= On
1
Concert Grand
Damper = On
1
Concert Grand
Foot SW = On
1
Concert Grand
Exp Pedal = On
1
Concert Grand
Modulation = On
1
Concert Grand
Fine Tune = 0
