25
Volume level
Time
ATTACK
DECAY
RELEASE
KEY OFF
different types of sounds.
TONE MODIFY settings can be done for each
zone individually.
The following parameters are provided:
CUTOFF, ATTACK, DECAY and RELEASE.
Make sure that the TONE MODIFY button in the CONTROL KNOBS section
is lit.
If the TONE MODIFY button is turned off, press it to turn it ON.
The CONTROL KNOBS are now active and assigned to the Tone Modify
parameters for the current sound.
Use the CONTROL KNOBS to change the current settings
for the selected
zone.
Each parameter of the TONE MODIFY function has an adjustable range
from -50 to +50.
CUTOFF:
Raising the CUTOFF level makes the sound brighter, lowering
the level makes the sound duller.
ATTACK:
As the value increases, the attack time becomes longer, which
means a slower attack is produced.
DECAY:
This parameter controls the amount of time from the peak
level to the sustain level of the sound.
RELEASE:
This parameter controls the amount of time needed for the
sound to fade out after the key is released.
Note:
If the selected zone is set to BOTH, changing the TONE MODIFY
parameters affects for both internal and external sections. If you want
different settings for internal and external sections, enter the edit mode
by pressing the MENU button and select internal or external section
with ZONE SELECT button. (See page 29 for details.)
5.4 MIDI CC# (Control Change)
The MP4 can send any MIDI Continuous Controller information to any MIDI
Instrument or Device.
1
CUT ATK DCY RLS
+50 -20 +40 +10