![background image](http://html1.mh-extra.com/html/kawai/mp4/mp4_owners-manual_3977227013.webp)
13
2
String Pad
Note:
Internal sounds or Setups can be also selected using the VALUE buttons.
You should also listen to the preprogrammed Setups.
Setups are organized in 8 Banks with 8 Numbers each (total 64 Setups).
Press the SETUP button to change to SETUP mode and select a Setup by
pressing one of the Bank buttons in the upper row followed by a Number
button in the lower row.
The display shows the currently selected Setup name.
In Sound mode, the “1” in the display indicates that the zone 1 is currently
selected. The default settings of the zones are as follows.
Zone 1 Internal
On (Plays internal sound)
Zone 2 Internal
Off (Muted)
Zone 3 External On (Plays external device) The default TX channel is 1.
Zone 4 External Off (Muted)
The zone mode for each zone is indicated by the INT/EXT LED beside the
faders. The zone status for each zone is indicated by the ZONE ON/OFF
buttons. If the ZONE buttons is red, this zone is assigned to the entire
keyrange of the MP4. If the button is green, the key range for that zone is
less than the entire key range. You can check the key range setting by holding
the SELECT button for the zone for 1 second.
2.3 Layer
Let’s try layering another sound. Turn the zone 2 on by pressing the ZONE
ON/OFF button for zone 2. The ZONE SELECT button for zone 2 is
automatically selected and the display shows the sound name for zone 2.
Select the sound for zone 2 with the SOUND SELECT buttons as shown in
the previous section.
Adjust the volume balance of zone 1 and 2 with the faders for each zone.
2.4 Split
Now let’s split the keyboard and play different sounds in upper and lower
sections.
Press and hold the ZONE SELECT button for zone 1. The display shows
the key range for zone 1 as follows.
While still holding down the ZONE SELECT button for zone 1, press the
lowest note on the keyboard. The display changes as follows.
1
Key
I
C-2 >G8
Range
E
C-2 >G8
1
KeyRange(Both)
=
I
A-1 > ----