![background image](http://html1.mh-extra.com/html/kawai/mp4/mp4_owners-manual_3977227008.webp)
8
1. NAMES AND FUNCTIONS
1.1 FRONT PANEL
[FADER SECTION]
1. VOLUME Fader
The VOLUME fader controls the master volume level of the MP4.
2. ZONE SELECT buttons
The ZONE SELECT buttons are used to select one of the four zones for editing.
Only one zone can be selected at a time. The front panel setting represents the
current zone status.
3. ON/OFF buttons
The ON/OFF buttons are used to turn zones ON/OFF. When the button is lit, the
zone is active.
Normally the button color is red, but when a zone is not using the full
keyboard range the color will be green to indicate it.
4. FADERS (zone volume level control)
Each fader controls the volume level of a designated zone. When multiple zones are
active, these faders can be used as an audio mixer.
[CONTROL KNOBS SECTION]
The four CONTROL KNOBS are multi-function real time controllers. The different
functions can be selected using the four buttons to the left side of the CONTROL
KNOBS. When a function is active, its button is lit. Touching any of these knobs
will instantly change the display to the current knob function and value.
5. EFFECT button
When this button is lit, the CONTROL KNOBS will adjust the REVERB time,
REVERB depth, EFX rate and EFX depth.
6. EQ button
When this button is lit, the CONTROL KNOBS will adjust the 4-band graphic
equalizer.
7. TONE MODIFY button
When this button is lit, the CONTROL KNOBS will adjust the CUTOFF, ATTACK,
DECAY and RELEASE Levels for the selected zone.
8. MIDI CC# button
When this button is lit, MIDI control changes are sent from the MP4 to the MIDI
device specified by the selected zone.
Some control changes can also be used with
the internal sounds.
[WHEEL CONTROLLERS]
9. PITCH BEND
This control wheel smoothly bends the pitch Up or Down from its current value.
10. MODULATION
This control wheel controls the modulation (vibrato) depth. Moving the wheel forward
increases the vibrato depth.
10
1
2
3
4
5
6
7
8
9