15
Use the MENU buttons to change the volume.
Note:
The metronome tempo is also used as MIDI clock tempo to control an
external sequencer. See page 20 for details.
2.7 Transpose
When the Transpose function is “ON” the MP4’s key can be raised or lowered
in half steps. The available range of transposition is 24 semitones, either up
or down.
While holding down the TRANSPOSE button, press any key on the MP4
keyboard to select a new transposed key. Pressing the F key above middle C
for example will transpose the MP4 UP to the key of F (+5 half steps).
The transpose amount can also be set using the VALUE buttons.
While holding the TRANSPOSE button down, press the VALUE buttons to
change the transpose amount.
The display shows the current TRANSPOSE amount when the TRANSPOSE
button is held down. A value of “0” indicates no transposition.
2.8 Using the MP4 as a MIDI controller
The MP4 can control external devices via MIDI.
MIDI Connection
Connect the MIDI OUT on the MP4 to the MIDI IN on an external MIDI
device with a MIDI cable.
Selecting the MIDI Channel
The MIDI Transmit Channel of the MP4 must be matched with the Receive
Channel of any MIDI devices connected to the MP4.
Select zone 3 by pressing the ZONE SELECT button 3. (Zone 3 is set to
external as default setting.)
Press the MENU-UP button until “TX Channel” (Transmit Channel) appears
on the display.
Use the VALUE buttons to choose a MIDI Transmit Channel from 1 to 16.
3
External
TX Channel = 1
MASTER TRANS
+12
