![background image](http://html1.mh-extra.com/html/kawai/mp4/mp4_owners-manual_3977227030.webp)
30
the piano response for each player and each sound.
The effect is only available for the internal piano sounds. Other sounds cannot
use this parameter.
Normal:
Produces the normal tone of an acoustic piano throughout the entire
dynamic range.
Mellow:
Reproduces the effect of a softer hammer surface. It produces a
mellower tone throughout the entire dynamic range.
Dynamic: This setting is not possible with an acoustic piano. Softly played
notes will have the tone of a mellow voicing and notes played harder
will have the tone of a bright voicing. This setting produces a
dramatic change from mellow to bright throughout the entire
dynamic range.
Bright:
Produces a brighter tone throughout the entire dynamic range.
6.2.4
Pedal Effect (Int Piano only)
When the sustain pedal is depressed on an acoustic piano, all the dampers
are lifted up allowing the strings to vibrate freely. When you play a note or
chord on the piano with the sustain pedal depressed not only will the strings
for the notes you played vibrate but other strings will vibrate in sympathetic
resonance. The Damper Effect function simulates this phenomenon.
The value changes from 0 to 2.
0=Off
1=Normal
2=Strong.
When a PIANO sound is not selected, this page won’t be displayed.
6.2.5 TX Ch (Ext only)
This parameter sets the MIDI transmit channel for the selected zone. All
MIDI data for the selected zone will be transmitted on this channel. Make
sure that the receiving channel for any external MIDI devices to be controlled
from this zone is set to the same channel as the zone.
6.2.6 TX Prg # (Ext only)
This parameter determines if a Program Change Number will be transmitted
(On) or not (Off) when a SETUP is recalled.
If you want to switch sounds
on external MIDI devices every time you call the Setup turn this parameter
ON.
6.2.7 Prg # (Ext only)
This parameter determines which Program Change Number will be
transmitted when a SETUP is recalled. When the TX Prg # is set to Off, this
page won’t be displayed.
Select the desired PRG number for the sound you
want to select on the external MIDI device.
1
Concert Grand
PedalEffect= 1
3
External
TX Channel = 1
3
External
Prg # = 001
3
External
TX Prg # = On