KaVo LUX 540 LED T, Instructions For Use Manual

Page: 80 / 110

Instructions for use KaVoLUX 540 LED U / T
6 Operation | 6.1 Operation of the treatment light KaVoLUX 540 LED U
80 / 110
or
▶ Hold your hand just in front of the sensor.
ð
Treatment light is switched on, Display LED shining.
▶ Press the "operating light" button once again.
or
▶
Hold your hand just in front of the sensor.
ð
Treatment light is switched off, Display LED not shining.
6.1.2 Setting the brightness
Note
The maximum possible brightness of the light is set in five steps using the
"Treatment light" key.
▶
Press and hold down the "Treatment light" key.
ð
Signal buzzes, brightness changes from dark to bright in stages.
▶
When the desired brightness is reached, release the "Treatment light" key.
6.1.3 Changing between COMPOsave mode res. dimmed
light and normal light
▶
Press and hold down the switch of the foot control and press the "Dim treat-
ment light" button until you hear the buzzer.
ð
The treatment light switches from COMPOsave mode to dimmed normal
light.
▶ Press and hold down the switch of the foot control and press the "Dim treat-
ment light" button until you hear the buzzer.
ð
The treatment light switches back to COMPOsave mode.
ð
The COMPOsave mode can be recognised by the yellow light.