KaVo LUX 540 LED T, Instructions For Use Manual

Page: 62 / 110

Instructions for use KaVoLUX 540 LED U / T
4 Assembly | 4.4 Assembly of the KaVoLUX 540 LED T
62 / 110
Note
When the mounting rod extends into the light holder, it can damage the
paint. Firmly hold the mounting pole when inserting. Screw in the depth stop
screw
⑥
completely.
▶ Insert the mounting pole ② into the light holder ③ .
Positioning the mounting pole:
▪ It is approx. 1680 mm from the top edge to the floor
▪ The borehole for the swivel arm brake points in the direction 6 o´ clock
▶
Tighten the protective conductor screw
⑤
and fixing screws
④
.
▶
Align the mounting pole (see unit installation instructions) so that it is pre-
cisely vertical (use a spirit level).
Install the swinging arm
See also:
2 4.3.1.2 Install the swivel arm, Page 31
Connect the lines
▶ Connect the protective conductor to the body of the unit.
▶
Connect the supply line (24 V AC) to the terminal at the body base (polarity
is not relevant).
Run the line coming from the terminal to the low voltage distributor board as
follows:
▪ Contact 1: brown wire