KaVo ARCTICA, Care Instructions

Page: 9 / 24

Care instructions KaVo ARCTICA Engine
3 Servicing after 80 operating hours | 3.2 Cleaning the coolant container
Name Mat.No. Application Mixing ratio Coolant lubricant max. marking
Coolant 1 Mat. no.
1.001.6002
ZS, plastics,
glass ceramics
4 % 0.25 l 5.5 l
Coolant 2 Mat. no.
1.001.6003
Titanium, ZS,
plastics, glass ce‐
ramics
10 % 0.6 l 5 l
3.2 Cleaning the coolant container
Prior to replacing the coolant lubricant, clean the coolant container with hot water:
▶ Remove all residual medium from the coolant lubricant container.
▶ Fill the coolant lubricant container up to half with hot water (maximum 50°C).
▶ Close the coolant lubricant container with 1.008.6460 filter holder and 1.009.9667
closure stopper.
▶ Deposits can be removed by shaking in hot water.
Note
Spent coolant lubricant and materials contaminated with coolant lubricant must be
disposed of in accordance with the safety data sheet. The waste code is indicated
on the canister of the coolant lubricant. Safety data sheets can be obtained under
www.kavo-cadcam.de.
Note
The coolant lubricant pump must be vented if it fails to start up after replacement of
the coolant lubricant.
3.3 Cleaning the filter of the coolant lubricant container and replacing it,
if needed
▶ Pull the coolant container ③ out of the machine.
▶ Dismantle the filter holder ① (Mat. no. 1.008.6460) with sieve ② (Mat. no.
0.763.3423) and O-ring 43x4 (Mat. no. 0.236.0134).
▶ Clean the sieve under running water or replace it.
▶ Lubricate the O-ring 43x4 with Vaseline or replace it.
▶ Re-install the filter holder ① with sieve ② and O-ring 43x4.
9 / 24