KaVo ARCTICA, Care Instructions

Page: 16 / 24

Care instructions KaVo ARCTICA Engine
4 Servicing after 160 operating hours | 4.1 Cleaning and exchanging the chuck
16 / 24
Note
If the chuck cannot be dismantled by hand, use the two tools included in the deliv‐
ery to dismantle the chuck.
▶ Position the fork wrench SW 13 ① on the double-flat of the spindle and dismount
the chuck at the front hexagon socket using ring wrench SW 10 ② in anticlock‐
wise direction.
▶ Remove the chuck (Mat. no. 1.007.8808).
Cleaning the spindle and chuck
NOTICE
Inappropriate cleaning of the spindle and chuck.
Damage to the spindle and chuck.
▶ Never use ultrasound, steam cleaner or compressed air for cleaning.
▶ Make sure that no cleaning agents get into the inside of the spindle.
▶ Lubricate the thread of the chuck lightly with lubrication oil (Mat. no. 0.489.3456).
▶ Only use the paintbrush and brush from the care set for cleaning.
Note
If the chuck cannot be dismantled by hand, the chuck (Mat. no. 1.007.8808) must
be replaced.
▶ Clean the chuck mount and chuck with a brush or a paintbrush.
▶ Lightly oil the thread of the chuck.
▶ Clean the spindle by rotating in anticlockwise direction using the spiral cleaning
brush 1.011.4800.