KaVo ARCTICA, Care Instructions

Page: 13 / 24

Care instructions KaVo ARCTICA Engine
3 Servicing after 80 operating hours | 3.6 Checking and cleaning the clamping surfaces of the tools
▶ Clean the filter with warm water. Then press it between two pieces of cloth to dry
it and re-insert the filter; replace the filter, if needed.
3.6 Checking and cleaning the clamping surfaces of the tools
▶ Clean the clamping surfaces of the tools and block holder, especially after ZS pro‐
cessing, using brass cleaning brush 1.011.4797.
▶ If there are any conspicuous coatings, check the coolant lubricant for contamina‐
tion and replace it, if needed.
3.7 Cleaning the tool magazine and holder rings
▶ Clean the tool magazine and holder rings in the magazine under warm running
water using the brass cleaning brush 1.011.4797.
▶ Then dry the tool magazine well and then wet it with spindle oil.
▶ Wet the holder rings of the tool magazine with spindle oil.
13 / 24