KaVo ARCTICA, Care Instructions

Page: 6 / 24

Care instructions KaVo ARCTICA Engine
2 Servicing, daily | 2.1 Cleaning the housing and workspace
6 / 24
2 Servicing, daily
Note
During all servicing and cleaning work in the workspace, the air purge system (la‐
ser-spindle) must be switched on
Daily servicing is indicated briefly by a coloured symbol on the ARCTICA desktop.
Note
Open the protective door, press the cleaning button and select "Switch on" for the
compressed air for cleaning
See general note 1.3
2.1 Cleaning the housing and workspace
▶ Vacuum the interior of the machine daily or clean it with a paintbrush.
▶ Wipe down the outer housing and protective door with a dry, lint-free cloth.
▶ If needed, remove soiling on the outer housing and on the outside of the protec‐
tive door with a wet cloth and warm clear water, soapy water or KaVo plastics
cleaner (0.611.0030).
▶ If needed, remove soiling on the inside of the protective door with a wet cloth and
warm clear water or KaVo plastics cleaner (0.611.0030).
2.2 Emptying and cleaning the chip tray
▶ Remove the chip tray from the workspace and empty it.
▶ Take out the filter holder ② and chip sieve filter ③ from the chip tray ④.