-5-
機台務必平放地上,機器避免在強烈
噪音的環境下操作。
16. 選用適當的電源插頭,並由電子技師
將其安裝在機器上,且插頭必須插在
接地線之插座上。
17. 機器只允許被使用於指定用途上,其
他用途是不允許的。
18. 修改或變更機器必須依照安全規定及
標準,同時採取有效的安全措施或變
更機器所引起損壞之責。
19. 警告提示以兩種符號標示:
(1) 對操作員或服務人員之傷害危險
,也為了避免觸電之危險,請勿
打開馬達電器箱之外蓋,也不要
觸摸電器箱裡面之零件。
(2) 必須特別注意事項
a. 絕對不可在移動外蓋,手指保
護蓋或安全配件後,進行機器
操作,以免導致人員受傷。
b. 為了避免被機器纏住,當機器
運轉中,您的手、頭髮及衣服
,需遠離手輪;此外這些部位
周圍不可放置任何物品,以免
導致人員受傷。
15. 為使機器能正常操作以及減少噪音,
15. In order to operate properly and to
reduce the noise, please place the
machine flat and level on the
ground. Avoid operating the
sewing machine at a noisy
surrounding.
16. Select a proper power plug and
install it by an electrician. Please
connect the power plug to a
grounded receptacle.
17. This machine can only be used for
the designed purpose. Other uses
of this machine are not allowed.
18. Any modification or conversion
made on this machine must be
conformed with the safety
standards and regulations.
Precaution is necessary. No
responsibility will our company take
for damages caused by any
modification or conversion of this
machine without permission.
19. Two safety warning signs are
applied as warning signs:
(1) For the safety of operators and
service persons, please don't
open the cover of any electronic
control boxes of motor or other
devices and don't touch any
components inside to avoid
electrical shock hazards.
(2) Always keep in mind:
a. Please never operate this
machine without outer cover,
finger guard or any safety
device to avoid physical injury.
b. Please keep your hair, fingers
and clothes away from the hand
wheel while the machine is in
operation, as well as never put
anything near these parts, to
prevent the risk of injuries by
tangled into them.
Summary of Contents for Siruba LF-D6
