95
During the search you will see the
following message (example):
The newly found channels are identi
fi
ed
with the suf
fi
x “New” (see example
screenshot on the right).
Note:
You can cancel the search at any time
by pressing the
button.
Mainmenu - Search Channel
- “free & scrambled”
All channels are searched for
- “only free”
Only free-to-air channels are searched for
- “only scrambled”
Only encrypted channels are searched for
To view encrypted channels you need an appropriate CA (Conditional Access) module and
a valid smart card together with a valid subscription to the relevant Pay TV provider.
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
Then use the
buttons to switch to the
fi
eld “Start search”. Pressing the
button starts the
search.
After completion of the search, you
will see the following display (example):
Press the
button.
Summary of Contents for UFS 940sw
