40
Transmission channel
Use the
buttons to switch to
the “Transmission channel” line and use
the
buttons to select a free and
available transmission channel (0 = 1400,
1 = 1516, 2 = 1632 or 3 = 1748).
Press the
button to con
fi
rm the displayed
message. If no connection can be established
to the single-cable system, check your settings
(transmission channel) and if necessary call for
expert help.
Press the
button to con
fi
rm the displayed
message. Then press the
button.
The following display appears:
Connection and Setup
Test connection
Use the
buttons to switch to the “Test connection” line and then press the
button to
test your settings. The following display appears:
Use the
button to con
fi
rm with “Yes,
save changes”. Use the
buttons to
switch to the “System” line and then press
then
(green) button. The receiver will
automatically display the menu for the channel
search. Continue the
fi
rst installation by
selecting “Execute Channel search”.
Summary of Contents for UFS 940sw
