48
Network Search
Use the
buttons (On/Off) to select whether a network search should be performed. If you
set the network search to “Off”, only the factory default transponders for the satellite(s) you previously
selected will be searched for new as yet unsaved channels. If you set the network search to “On”, the
transponder network enables additional transponders that have not yet been stored to be located.
They are then stored and searched for new channels in the same way as the existing transponders.
When you have completed all settings, press the
(green) button. The following displays appear
(example):
During the search you will see the
following message (example):
Newly found channels are identi
fi
ed
with the suf
fi
x “New” (see screenshot
example, right).
Note:
You can cancel the search at any time
by pressing the
button.
Connection and Setup
After completion of the search, you will
see the following display (example):
Press the
button.
The following display appears:
Con
fi
rm the save procedure by pressing
the
button. The newly found
channels are added to the end of the
existing overall list and the receiver then
skips automatically to the settings for
“Date and Time”.
Summary of Contents for UFS 940sw
