27
Connection and Setup
When selecting the
satellite(s), make sure
that your reception
position is aligned to
the desired satellite(s)!
Satellite selection
Use the
buttons and the
button to select which satellites (max. 64) you would like to
receive with your reception system. The following display appears (example):
Use the
buttons to select the
fi
rst satellite slot. Press the
button to open the menu for
the satellite settings. The following display appears (example):
Satellite
Use the
buttons to adjust the desired satellites for the position you have selected.
However you can select here only those satellites that you had previously identi
fi
ed (checked).
DiSEqC Switch
Use the
buttons here to select the correct setting for your reception system (1, 2, 3, ... 16).
To deactivate a satellite, use the
buttons to select it and then press the
button.
Summary of Contents for UFS 940sw
