33
Con
fi
gure satellites
Press the
button to call up the menu. Use the
buttons and the
button to select
which satellites (max. 64) you would like to receive with your reception system. The following display
appears (example):
To deactivate a satellite, use the
buttons to select it and then press
the
button.
Use the
buttons to select the
fi
rst satellite slot. Press the
button to call up the menu for
the satellite settings. The following display appears (example):
Connection and Setup
Satellite
Use the
buttons to select a satellite for which you wish to make turntable settings. However you
can select here only those satellites that you had previously identi
fi
ed (checked).
Test transponder
Use the
buttons to select a transponder for the satellite selected above.
LNB Type (settings)
Press the
button and use the
buttons to select the LNB type used in your system.
The selections available are “Universal” and “user-de
fi
ned” (the selection “Wideband” is required
only for single-cable feed systems).
Universal:
No further input is required, since all necessary frequency ranges are covered by a universal LNB.
Summary of Contents for UFS 940sw
