117
Mainmenu - Service Menu
Use the
buttons to select
“Manage channel list”. Use the
buttons to switch to the “USB Device”
line. If several data carriers are
connected to the receiver, you can use
the
buttons here to select the
USB data carrier on which the channel list to be loaded is held, or the USB data carrier on
to which the current channel list for your receiver should be stored/saved.
Load
Use the
buttons to switch to the “Load” line. Press the
button. The following display appears:
Con
fi
rm with the
button. The channel list is being loaded. On completion the receiver
automatically skips back to the “USB Device Management” menu.
Loading the channel list
may take a few minutes.
Save
Use the
buttons to switch to the “Save” line. Press the
button. The following display appears:
Con
fi
rm with the
button. The channel list is being saved. On completion the receiver automatically
skips back to the “USB Device Management” menu.
The receiver here offers you the option
of saving to a USB device the channel
list you are currently using, so that
you can recover it later if required.
Instructions on how to reload the
channel list can be found at the top of
this page (item “Load”).
Summary of Contents for UFS 940sw
