Kathrein UFS 640si Operating Manual Download

Page: 54 / 80

Press the

button You will be asked whether you wish to save the changes or not. Use the

buttons

to make the selection and confi rm the selection with the

button. If you select “Yes, save changes”,

the newly found channels will be added to the end of the channel list. Then press the

button to exit

the menu. The channel list is opened on to the TV screen by pressing the

button (see also section

“On-screen displays” “Channel list TV/Radio”).

SEARCH CHANNELS (CHANNEL SEARCH)

CHANNEL SEARCH WITH SERVICE ID

After completion of the search, you will
see the following message (example):

The

buttons allow you to select different sets of parameters for the scan.

Satellite

Use the

buttons to select the satellite that is transmitting the channels to be scanned.

Summary of Contents for UFS 640si

















































































Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands

Kathrein UFS 640si, Operating Manual

Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands