Kathrein UFS 640si Operating Manual Download Page 48

Page: 48 / 80

EDIT CHANNEL LIST

EDIT FAVOURITES LISTS

When you have selected the favourites list to be edited (called up using the

(red) button and selected

using the

buttons), press the

(red dot) button to open the edit menu. You have the following

edit options:

Remove from favorites list:

The channel will be removed from the favourites list

- Llock:

Channel can be viewed only by entering a PIN

Rename favorites list:

The favourites list can be renamed

- Start

Blockselection:

Several channels can be selected at the same time and edited together

REMOVE FROM THE FAVOURITES LIST

Use the

buttons to select the channel to be removed from the favorites list you have selected. Press

the

button to open the edit menu and use the

buttons to select the “Remove from favourites list”

function. Confi rm the command by pressing the

button.

The channel you previously selected is now removed from the favourites list (but not deleted from the overall
satellites list).

Summary of Contents for UFS 640si

















































































Search results

Summary of Contents for UFS 640si

Reviews:

Brands by name

Popular brands

Kathrein UFS 640si, Operating Manual

Search results

Summary of Contents for UFS 640si

Reviews:

Brands by name

Popular brands