Kathrein UFS 640si, Operating Manual

Page: 25 / 80

25
FIRST INSTALLATION: single-cable system (manual)
If no connection to the single-cable system could be established, the following display appears:
Check your settings and if necessary call for expert
help.
When the “EXR 552” single-cable
switching matrix is being used, it
is essential that the LNB is set to
“Universal”!
Confi rm this display with the button. Then press the
button. You will be asked whether you wish to save
the changes. Use the buttons to select “Yes, save
changes” and confi rm by pressing the button. Now
press the
$
(green) button.
The receiver will automatically display the menu for the channel search. Continue with the section (Execute
channel search).
Transmission channel
Use the buttons to select a free available transmission channel. A maximum of two transmission
channels are available (1400 and 1516 MHz).
Test connection
When you have set a free transmission channel, press the buttons to switch to the “Test connection”
selection fi eld, then press the button. The receiver now tests whether a connection to the single-cable
system can be established or not. As soon as the receiver has established a connection to the single-cable
system, you will see the following display:
Selection “EXR 552”