Kathrein UFS 640si Operating Manual Download

Page: 38 / 80

EPG - ELECTRONIC PROGRAMME GUIDE

ADDITIONAL INFORMATION (i BUTTON)

The additional information available for a programme is displayed in its own window. By pressing the

button, if available, you can open further additional information on the selected programme.

The

buttons enable you to display the additional information for the preceding or following programmes

in the order of the previously selected list (see header). This feature always assumes that the data has been
supplied by the channel provider.

Using the

(red dot) button you can load the selected programme into the recording settings (see

“Recording” section).

Press the

button to drop the additional information.

The additional information can always be called up by pressing

the

button whenever the “i symbol” appears in front of the

programme name (see screenshot on the right). First however
the channel must be selected. The following display appears
(example):

Summary of Contents for UFS 640si

















































































Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands

Kathrein UFS 640si, Operating Manual

Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands