Kathrein UFS 640si Operating Manual Download

Page: 29 / 80

OPERATING INSTRUCTIONS

The structure of the menu concept is based on logical operating sequences. The programme showing on the
current selected channel always appears in the top right-hand corner of the screen.

You will fi nd detailed descriptions of the selected menu items in the relevant sections of the operating
manual.

Note:

The selected menus, sub-menus and positions, as well as the parameters to be set, are each
highlighted in colour. The menus are self-explanatory.

Pay attention to the bar at the bottom
of the on-screen display. These
provide information on what to do
next.

Press the

button to open the main menu, and use the

buttons to select the sub-menus.

Press the

button to access the sub-menus. Use the

buttons to select the sub-menu options.

The settings under the various options are made either by pressing the

buttons or using the numeric

pad. You can exit the main menu and sub-menus, and the various options, step-by-step by pressing the

button (the settings/changes you made are saved). Press

to return directly from one of the menus to

the TV picture (the settings/changes you made are saved).

MENU CONCEPT

Summary of Contents for UFS 640si

















































































Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands

Kathrein UFS 640si, Operating Manual

Search results

Summary of Contents for UFS 640si

Reviews:

Related manuals for UFS 640si

Brands by name

Popular brands