CSN-A1K User manual
13
/
72
7 Using attention
7.1 Please notice, the ESD wrist ring and the humidity manufatures ETC, when using the
printer, to protect the inner elctrontic parts of the printer from the damage of ESD, because
the TPH of the Printer and photoelectric sensor are ESD Sensitive parts.
7.2 For protecting plastic shaft, don’t smear any oil or others on the rubber parts.
7.3 Don’t touch the TPH, TPH having the palm oil, will induce the usage of the printer.If
any oil or others in the TPH, pls using an alcohol cotton stick clean the area between
plastic shaft and printer head at once.PS,Don’t strike the TPH.
7.4 Due to the printer is easy-paper structure,you need pick up the rubber stick only push
the rubber stick.So,if the paper jam,push harder will cause the rubber stick gearwheel
damaged.so pls don’t push the paper harder, pls do open the cover and re-fill the paper
7.5 The temperature of the TPH protection must be below 65
℃
, if you print
continously,Because the exterior of the temperature of the IC protection & motor can
’
t not
over 90
℃
to protect the motor thread ring.
7.6 Pls use the good quality paper, because the sensetive of the paper will infuence print
effect, meanwhile, rough paper will incease the excessive wear to the printer head, and
reduce the life of the printer.
8 ESC/POS Printing Command Set
8.1 Command list
Type
Command
Name
Print Commands
Print and line feed
Print and carriage return
Horizontal tab
Print the data in buffer
Set horizontal tab positions
Print and Feed n dots paper
Print and Feed n lines
Set peripheral device
Line spacing setting
Commands
Select default line spacing
Set line spacing
Select justification
Set left margin
Set absolute print position
