CSN-A1K User manual
16
/
72
HT
[Name]
Horizontal tab
[Format]
ASCII:
HT
Decimal:
9
Hexadecimal:
09
[Description]
Moves the print position to the next horizontal tab position.
[Notes]
This command is ignored unless the next horizontal tab position has
been set.
If the next horizontal tab position exceeds the printing area, the
printer sets the printing position to [printing area width+1].
Horizontal tab positions are set with
ESC D
.
If this command is received when the printing position is at [printing
area width+1], the printer executes print buffer-full printing of the
current line and horizontal tab processing from the beginning of the
next line.
[Reference]
ESC D
FF
[Name]
Print the data in buffer and locate to the next black mark
[Format]
ASCII:
FF
Decimal:
12
Hexadecimal:
0c
[Description]
Print the data in the buffer.
Locate to the black mark.
[Note]
Only board with black mark function support this command.
ESC D n1...nk NUL
[Name]
Set horizontal tab positions
[Format]
ASCII:
ESC D n1...nk NUL
Decimal:
27 68 n1…nk 00
Hexadecimal:
1B 44 n1…nk 00
[Range]
1≤n≤255
0≤k≤32
[Description]
Set horizontal tab positions.
n specifies the column number for setting a horizontal tab position
from the beginning of the line.
k indicates the total number of horizontal tab positions to be set.
[Note]
The horizontal tab position is stored as a value of [character width×n]
measured from the beginning of the line. The character width
includes the right-side character spacing, and double-width
