Kashino Technology CSN-A1K, User Manual

Page: 15 / 72

CSN-A1K User manual
15
/
72
DC2 T
Printing test page
FS t n
Select Time out (for CB105B)
New commands
DC2 E
Feed Paper to Mark
DC2 m d lL lH
Set Mark paper length
ESC C n
Set BM Max (For BM)
GS FF
Feed marked paper to print starting position
(For BM)
ESC i
Cut Paper (For cut)
ESC m
Partial Cut Paper (For cut)
GS V
Select cut mode and cut paper (For cut)
ESC p m
Generate pulse (For drawer)
ESC c 5
Enable/disable panel buttons (For button)
GS ( F
Set adjustment values(s) (For 701BM)
FS C
Start receive buffer count (For cb65c)
FS S
Send receive buffer count(For cb65c)
FS s
save print parameter (for XBLY)
FS d
Load default leaving factory set (for XBLY)
8.2 Command Detail
8.2.1 Print Commands
LF
[Name] Print and line feed
[Format] ASCII: LF
Decimal: 10
Hexadecimal: 0A
[Description] Prints the data in the print buffer and feeds one line, based on the current
line spacing.
[Note] This command sets the print position to the beginning of the line.
[Reference] ESC 2 , ESC 3
CR
[Name] Print and carriage return
[Format] ASCII: CR
Decimal: 13
Hexadecimal: 0D
[Description] When automatic line feed is enabled, this command functions the same
as
LF ; when automatic line feed is disabled, this command is ignored.
[Notes]  This command line feed is ignored with a serial interface model.
 Sets the print starting position to the beginning of the line.
[Reference] LF