CSN-A1K User manual
54
/
72
GS ( F pL pH a m nL nH (for 701BM)
[Name]
[Format]
ASCII:
GS (
F pL pH a m nL nH
Decimal:
29 40 70 pL pH a m nL nH
Hexadecimal:
1D 28 46 pL pH a m nL nH
[Range]
(pL+(pH×256))=4 (where pL=4, pH=0)
1≤a≤2
m = 0, 48 or 1, 49
0≤( nL+nH×256) ≤65535 (where 0≤nL≤255, 0≤nH≤255)
[Description]
This command is effective only when the BM sensor is enabled.
Sets adjustment values(s) for the printer operations specified by a.
pL and pH specifies the number of the parameter such as a to
(pL+(pH×256))bytes.
a specifies setting values for the positions to start printing and cutting
a
Function
1
Setting value for the positions to start the printing.
2
Setting value for the positions to start the cutting.
m specifies the direction of the adjustment.
m
Function
0,48
Specifies a forward paper feeding direction
1,49
Specifies a backward paper feeding direction.
nL and nH specifies the setting value to [(nL+nH×256)×0.125 mm].
The adjustment value for the print starting position (a=1) is affected
with the following commands:
GS FF
The adjustment value for the paper cutting position (a=2) is affected
with thefollowing commands:
GS V m n
[Default]
All adjustment values are set to “0”.
(At the factory setting, the print starting position and the cutting position
are set to the head position and the cutter position respectively when the
BM sensor detects the BM.)
[Reference]
GS FF
,
GS V
FS C (for CB65C)
[Name]
Start receive buffer count
[Format]
ASCII:
FS C
Decimal:
28 67
Hexadecimal:
1C 43
[Description]
Start receiving buffer count.
