CSN-A1K User manual
24
/
72
When the LSB of n is 0, double-strike mode is turned off.
When the LSB of n is 1, double-strike mode is turned on.
[Note]
Only the lowest bit of n is enabled.
Printer output is the same in double-strike mode and in emphasized
mode.
[Default]
n=0
[Reference]
ESC E n
ESC E n
[Name]
Turn emphasized mode on/off
[Format]
ASCII:
ESC E n
Decimal:
27 69 n
Hexadecimal:
1B 45 n
[Range]
0≤n≤255
[Description]
Turns emphasized mode on or off
When the LSB of n is 0, emphasized mode is turned off.
When the LSB of n is 1, emphasized mode is turned on.
[Note]
Only the least significant bit of n is enabled.
This command and
ESC !
turn on and off emphasized mode in the
same way. Be careful when this command is used with
ESC !
[Default]
n=0
[Reference]
ESC !
ESC SP n
[Name]
Set right-side character spacing
[Format]
ASCII:
ESC SP n
Decimal:
27 32 n
Hexadecimal:
1B 20 n
[Range]
0≤n≤255
[Description]
Sets the character spacing for the right side of the character to [n×0.125
mm (n×0.0049”)].
[Note]
The right-side character spacing for double-width mode is twice the
normal value. When characters are enlarged, the right-side character
spacing is n times normal value.
This command does not affect the setting of Kanji characters
This command sets values independently in standard mode.
[Default]
n=0
ESC SO n
[Name]
Select Double Width mode
[Format]
ASCII:
ESC SO n
