CSN-A1K User manual
53
/
72
m
Print mode
1, 49
Partial cut (one point left uncut)
66
Feeds paper (cutting po [n
×
0.125 mm]), and cuts the paper
partially (one point left uncut).
[Notes for
①
and
②
]
Cutting status is different, depending on the installed autocutter type.
This command is effective only when processed at the beginning of a
line.
[Note for
①
]
Only the partial cut is available; there is no full cut.
[Notes for
②
]
When n=0, the printer feeds the paper to the cutting position and
cuts it.
When n≠0, the printer feeds the paper to (cutting p[n×0.125
mm (0.0049”)]) and cuts it.
ESC P m t1 t2 (for Drawer)
[Name]
Generate pulse
[Format]
ASCII:
ESC p m t1
t2
Decimal:
27 112 m t1
t2
Hexadecimal:
1B
70 m t1
t2
[Range]
m=0,1,48,49
0≤t1≤255, 0≤t2≤255
[Description]
Outputs the pulse specified by t1 to connector pin m as follows:
m
Function
0,48
Drawer kick-out connector pin2.
1,49
Drawer kick-out connector pin5.
[Note]
The pulse ON time is [t1×2ms] and the OFF time is [t2×2ms].
If t2<t1, the OFF time is [t1×2ms].
ESC c 5 n(for buttons)
[Name]
Enable/disable panel buttons
[Format]
ASCII:
ESC c
5 n
Decimal:
27
99 53 n
Hexadecimal:
1B
03 35 n
[Range]
0≤n≤255
[Description]
Enable/disable panel buttons
（
support the panel buttons
）
When the LSB of n is 0, the panel buttons are enabled.
When the LSB of n is 1, the panel buttons are disabled.
[Default]
n=0
