CSN-A1K User manual
20
/
72
[Note]
This command is effective only when processed at the beginning of
the line in standard mode.
If the setting exceeds the printable area, the maximum value of the
printable area is used.
[Default]
nL=0, nH=0
ESC B n
[Name]
Set left blank char numbers
[Format]
ASCII:
ESC B n
Decimal:
27 66 n
Hexadecimal:
1B 42 n
[Range]
Default is 0
0 ≤ m ≤ 47
ESC $ nL nH
[Name]
Set absolute print positions
[Format]
ASCII:
ESC $ nL nH
Decimal:
27 36 nL nH
Hexadecimal:
1B 24 nL nH
[Range]
0≤nL≤255
0≤nH≤255
[Description] Set the distance from the beginning of the line to the position at which
subsequent are to be printed.
The distance from the beginning of the line to the print position is[(nL+nH
×256)×0.125 mm]
[Note]
Settings outside the specified printable area are ignored.
In standard mode, the horizontal motion unit (x) is used.
[Reference]
ESC \
,
GS $
,
GS \
8.2.3 Character Setting Commands
ESC ! n
[Name]
Select print mode
[Format]
ASCII:
ESC
!
n
Decimal:
27
33 n
