3400JF NOZZLE OPTIONS & PATTERN SIZES
NOTE:
Pattern sizes listed are approximate. Variations in voltage caused by regional electrical differences or
voltage drop due to long power cords may result in reduced pattern sizes.
•
All five nozzles are included with the 3400JF package.
•
The Cypress is the only nozzle that uses the separate collar labeled C2.
•
The Cypress, Linden, Willow, and Juniper nozzles use the 3/8” x 4” bolt.
•
The Sequoia nozzle uses the shorter 3/8” x 2.25” bolt.
8
Cypress Display:
Produces a 9-stream
arch 6’ tall by 16’ wide. The Cypress
nozzle (marked C1 on fin) makes use of
the collar (marked C2 on the top rim)
and the 3/8” x 4” bolt.
Linden Display:
Produces a two-tiered
display with a center column 6’ tall by
3’ wide and an outer cone 3.5’ tall by
14’ wide. The Linden nozzle (marked
L inside one of the fins) uses the 3/8” x
4” bolt.
Juniper Display:
Produces a wide cone
of water 3’ tall by 20’ wide. The Juniper
nozzle (marked with J on in inside of the
nozzle cone) uses the 3/8” x 4” bolt.
Sequoia Display:
Produces a narrow
column of water 7’
tall by 4’ wide. The
Sequoia nozzle is
not marked and uses
the shorter 3/8” x
2.25” bolt.
Willow Display:
Produces a cone of
water 4.5’ tall by 15’ wide. The Willow
nozzle (marked W on the inside of the
cone) uses the 3/8” x 4” bolt.
