background image

5

Safety

WARNING: This machine exceeds 
85 dB. Appropriate ear protection 
must be worn.

AVERTISSEMENT: 

Cette machine 

excède 85 dB et une protection de 
l'ouïe appropriée doit être portée

WARNING: Hot discharge fluid. 
Do not touch or direct discharge 
stream at persons or animals.

AVERTISSEMENT: Liquide de 
décharge chaud. Ne pas toucher 
ou décharger directement le jet 
vers des personnes ou des 
animaux

WARNING: This machine 
produces hot water and must 

have insulated components attached to protect the 
operator.

AVERTISSEMENT: Cette machine produit de l'eau 
chaude et doit comporter des composants isolés 
attachés pour protéger l'opérateur.

WARNING: Risk of injury. Hot 
surfaces can cause burns. Use 
only designated gripping areas 
of spray gun and wand. Do not 
place hands or feet on non-
insulated areas of the pressure 
washer. 

AVERTISSEMENT: Risque de 
blessures. Les surfaces chaudes 
peuvent causer des brûlures. 

Utiliser uniquement les zones de prise désignées 
du pistolet pulvérisateur et de la lance. Ne pas 
placer les mains ou les pieds sur des endroits non 
isolés de la laveuse à pression

11. To reduce the risk of injury, close supervision is 

necessary when a machine is used near children. 
Do not allow children to operate the pressure 
washer. 

This machine must be attended during 

operation. 

WARNING: Grip cleaning wand 
securely with both hands 
before starting. Failure to do 
this could result in injury from a 
whipping wand.

AVERTISSEMENT: Agripper la 
lance de nettoyage avec les 
deux mains avant de 
commencer. Le non-respect de 
cette consigne pourrait mener à 
des blessures causées par le 

mouvement violent de la lance.

12. Never make adjustments on machine while in 

operation.

13. Be certain all quick coupler fittings are secured 

before using pressure washer.

WARNING: High pressure 
developed by these machines 
will cause personal injury or 
equipment damage. Keep clear 
of nozzle. Use caution when 
operating. Do not direct 
discharge stream at people or 
animals, or severe injury   or 
death will result. 

AVERTISSEMENT: La haute 

pression générée par ces machines causera des 
lésions corporelles ou des dommages à 
l'équipement. Se tenir à l'écart de la buse. Faire 
preuve de prudence lors de l'utilisation. Ne pas 
décharger directement le jet vers des personnes 
ou des animaux, car cela risquerait de causer des 
blessures graves ou même la mort.

WARNING: Protect machine 
from freezing.

AVERTISSEMENT: Protéger la 
machine contre le gel

14.To keep machine in best 
operating conditions, it is 
important you protect machine 
from freezing. Failure to protect 
machine from freezing could 
cause malfunction of the machine 

and result in death, serious bodily injury, and/or 
property damage. Follow storage instructions 
specified in this manual.

15. Inlet water must be clean fresh water and no hotter 

then 90°F.

WARNING

EAR PROTECTION

MUST BE WORN

WARNING

HOT DISCHARGE FLUID:

DO NOT TOUCH OR

DIRECT DISCHARGE

STEAM AT PERSONS.

WARNING

RISK OF INJURY. 

HOT SURFACES 

CAN CAUSE BURNS

WARNING

TRIGGER GUN KICKS 

 BACK —  HOLD WITH 

        BOTH HANDS

WARNING

RISK OF INJECTION 

OR SEVERE INJURY

TO PERSONS. KEEP 

CLEAR OF NOZZLE.

WARNING

PROCTECT FROM

FREEZING

Karcher HDS 3.5/40 GE MT Operator’s Manual  9.807-942.0 - C

Summary of Contents for Trailer HDS Series

































Reviews: